工厂供电技术实训室

一、实训室设备：

工厂供电技术实训室面积60平方米，拥有工厂供电技术实训装置（THSPGC-1B）2台套、常用实物器件及多媒体教学设备，实训装置包括控制屏、控制柜和继保柜等，可满足电气自动化技术、机电一体化技术等专业的《工厂供电》课程实训教学。

二、主要实训项目：

1、实训台电气主接线模拟图的认知

2、电气主接线图的认知

3、电流互感器与电压互感器的接线方式

4、变压器有载调压

5、工厂供电倒闸操作

6、模拟系统正常、最大、最小运行方式

7、模拟系统短路实训

8、微机线路保护装置参数整定操作

9、无时限电流速断保护实训

10、带时限电流速断保护实训

11、微机定时限过电流保护实训

12、反时限过电流保护实训

13、电流电压连锁保护实训

14、备投投入条件测试

15、进线备投（明备用）及自适应实训

16、无功自动补偿实训

17、变压器电流速断供电线路带时限的过电流保护

18、配电变压器的过负荷保护

Factory Power Supply Technology Training Room

1、 Training room equipment:

The factory power supply technology training room covers an area of 60 square meters and has 2 sets of factory power supply technology training devices (THSPGC-1B), commonly used physical devices, and multimedia teaching equipment. The training devices include control screens, control cabinets, and relay protection cabinets, which can meet the training requirements of 《Factory Power Supply》courses for majors such as electrical automation technology and mechatronics integration technology.

2、 Main practical training projects:

1. Cognition of the Electrical Main Wiring Simulation Diagram of the Training Platform

2. Cognition of Electrical Main Wiring Diagram

3. Wiring method of current transformer and voltage transformer

4. Transformer on-load voltage regulation

5. Factory power supply switching operation

6. Simulate normal, maximum, and minimum operating modes of the system

7. Simulated System Short Circuit Training

8. Parameter setting operation of microcomputer line protection device

9. Training on Time Limited Current Quick Break Protection

10. Training on Time Limited Current Quick Break Protection

11. Practical training on microcomputer timed overcurrent protection

12. Inverse time overcurrent protection training

13. Practical Training on Current and Voltage Interlock Protection

14. Condition test for standby operation

15. Incoming backup (open backup) and adaptive training

16. Practical Training on Reactive Power Automatic Compensation

17. Overcurrent protection with time limit for transformer current quick break power supply lines

18. Overload protection of distribution transformers