《电工电子实训室（一）》简介

一、实训室主要设备

电工电子实训室电工实训工位共38个，安装与调试接线网孔板50套，交流接触器等低压元器件50套，剥线钳等实训工具50套.

二、实训项目

开设的实训项目主要有：

1.低压元器件的拆装实训

2.单向启动控制线路安装与调试实训

3.顺序启动控制线路安装与调试实训

4.电动机正反转控制线路安装与调试实训

5.星三角降压启动控制线路安装与调试实训

6.能耗制动控制线路安装与调试实训

三、实训室功能

可开设课程为《电机与电气控制技术》，《电气控制线路安装与调试》课程，主要培养学生的实践能力，提高学生的实践知识综合应用能力，掌握低压元器件的认识与拆装以及基本电气控制线路的安装与调试定。

Introduction to “Electrical and Electronic Training Room”

I. Main equipment of training room

There are 38 electrician training stations in the electrician training room, including 50 sets of wiring mesh plates for installation and debugging, 50 sets of low-voltage components such as AC contactors, and 50 sets of training tools such as wire strippers.

II. Practical training projects

Practical training programs mainly include:

1. Disassembly and assembly training of low-voltage components

2. Unidirectional start control line installation and commissioning training

3. Training on installation and debugging of sequential start control circuit

4. Installation and debugging training of motor positive and negative turning control line

5. Installation and commissioning training of Star Triangle step-down start control circuit

6. Installation and debugging training of energy consumption brake control line

III. Function of training room

The courses can be "Motor and Electrical Control Technology" and "Electrical Control Circuit Installation and Commissioning", which mainly cultivate students' practical ability, improve students' comprehensive application ability of practical knowledge, master the understanding and disassembly of low-voltage components, as well as the installation and commissioning of basic electrical control circuit.